Mamut Cargo model is shipped with Tank Bag.
You can find detailed information about spare parts and accessories suitable for the product in the Spare parts section.
When purchasing a Mamut Trailer, you need to choose the one compatible with your bicycle from the following fasteners.
Regardless of the brand and model of your bicycle, if it is compatible with Quick Release; With Mamut Quick Release, you can mount between 126 - 160 mm tong opening values.
|A (Pass Length)||41 mm|
|B (Quick Release Length)||228 mm|
You can make your connection for a range of 126 mm at the minimum condition of value A and for a range of 160 mm at the maximum condition.
Mammoth Nut (For old model bicycles)
If your bicycle is not compatible with Quick Release, you can mount your Mamut Trailer with a Mamut Nut compatible with your bicycle.
|Mammoth Nut Models and Compatibilities:|
|Model||Axle Diameter||Tooth Step||Compatibility|
|3/8 x 24||3/8 (in)||24 (tpi)||Single tooth Contra Pedal|
|3/8 x 26||3/8 (in)||26 (tpi)||Shimano Nexus, British and Japanese one-piece axles|
|10 x 1||10 (mm)||1 (mm)||ISO and Japanese one-piece axles|
Units used in the compatibility table:
|in:||İnç (1 inç = 2,54 cm = 25,4 mm)|
|mm:||Milimetre (1 mm = 0,1 cm)|
|tpi:||Threads per Inch (İnç başına düşen diş sayısı)|
Drawbar Installation steps for type connection
|1||Original Quick Release on the bike|
|2||Quick Release/Nut on the bike opens|
|3||Quick Release/Nut on the bicycle is removed|
|4||Quick Release/Nut threaded into Drawbar|
|5||Quick Relase/Nut is inserted.|
|6||Quick Relase/Nut is tightened.|
|7||Mamut Rope hugs the bicycle.|
|8||Mamut Rope is attached to the drawbar.|
|9||Assembly is complete|