ADVENTURER
ADVENTURER
₺ 6,000.00
| Kategori | : | Models |
| Marka | : | Mamut Trailers |
| Stok Kodu | : | MTADVTR |
| Fiyat | : | ₺ 6,000.00 KDV Dahil |
Quick Release Installation steps for type connection
Quick Release
Resim 2
Resim 3
Resim 4
Resim 5
Resim 6
Resim 7
Resim 8
Resim 9
Adventure Spare Parts and Accessories
Mamut Adventurer Flag Holder - MTADVTR07 - Flag Group..
₺ 250.00
Mamut Adventure Front Headstock Connection Shaft - MTADVTR09 - Fork Front Tong Assembly..
₺ 450.00
-800x550w.jpg "Mamut Advertising Ön Maşa")
Mamut Advertising Ön Maşa - MTADVTG01 - Fork Front Tong Assembly..
₺ 2,250.00
Mamut Quick Release (New model bicycles)
When purchasing a Mamut Trailer, you need to choose the one compatible with your bicycle from the following fasteners.
Regardless of the brand and model of your bicycle, if it is compatible with Quick Release; With Mamut Quick Release, you can mount between 126 - 160 mm tong opening values.
| A (Pass Length) | 41 mm |
| B (Quick Release Length) | 228 mm |
You can make your connection for a range of 126 mm at the minimum condition of value A and for a range of 160 mm at the maximum condition.
Mammoth Nut (For old model bicycles)
If your bicycle is not compatible with Quick Release, you can mount your Mamut Trailer with a Mamut Nut compatible with your bicycle.
| Mammoth Nut Models and Compatibilities: | |||
| Model | Axle Diameter | Tooth Step | Compatibility |
| 3/8 x 24 | 3/8 (in) | 24 (tpi) | Single tooth Contra Pedal |
| 3/8 x 26 | 3/8 (in) | 26 (tpi) | Shimano Nexus, British and Japanese one-piece axles |
| 10 x 1 | 10 (mm) | 1 (mm) | ISO and Japanese one-piece axles |
Units used in the compatibility table:
| in: | İnç (1 inç = 2,54 cm = 25,4 mm) |
| mm: | Milimetre (1 mm = 0,1 cm) |
| tpi: | Threads per Inch (İnç başına düşen diş sayısı) |